Are you having trouble connecting the HP Envy 6400 printer to your wireless network? Do not worry, because this article will assist you in connecting you and your HP Printer connected to your wireless network. There are a few simple and practical steps that you’ll be able to print wirelessly using any mobile device in only a couple of clicks. So, let’s get started!
Why HP Envy 6400 printer not connecting to wifi?
There could be a variety of reasons that the HP Envy 6400 printer isn’t connected to WiFi. Here are the most frequent reasons:
- Incorrect WiFi password The incorrect WiFi password is among the most frequently cited reasons why printers aren’t able to join WiFi. Check to make sure you’ve used the proper password on your WiFi network.
- Low WiFi Signal Poor WiFi Signal: If your printer is situated too far from your WiFi router or located in an area where the wireless signal strength is low, it might not be connected to the internet.
- Printer Firmware Update If you’ve just updated the firmware on your printer and it’s causing the problem. In this scenario, you’ll need to upgrade the firmware of your printer to correct the problem.
- A Printer Driver that is out of date A driver that is not up-to-date could also block you from connecting your printer to the internet. Check to make sure you’ve installed the most recent driver for your printer on your system.
- Firewall Settings: The firewall settings may also be the reason your printer isn’t able to connect via WiFi. Be sure that your printer isn’t restricted by the firewall.
Steps to connect HP Envy 6400 Printer to wifi
- Check Your WiFi Network
In the first place, check you are sure that the WiFi functions well and has a reliable internet connection. This is essential because an insecure or weak network could result in connectivity issues that can hinder your printer’s connection to WiFi.
- Prepare Your Printer
After that, switch on the HP Envy 6400 printer and access the control panel of your printer. Click”Wireless” or the “Wireless” button, on the printer. This will bring you up to the Wireless Settings menu.
- Connect to Your WiFi Network
Go to the Wireless Settings menu, select “WiFi Protected Setup” and select “WPS Push Button.” This will search for WiFi networks. After your printer has discovered your network, you can select it and enter the network’s password. The printer will connect to the WiFi network.
- Test Your Connection
To verify you are connected to your WiFi network Print a test print. If your printer prints this test sheet, your connection is functioning properly. If not, return to the previous step and check your WiFi connection settings.
- Install Your Printer Software
After your printer has been attached to your WiFi network, you’ll need to install the printer’s software on your device or computer. The software can be found on the HP website and on the CD that comes with the printer. Follow the on-screen directions to install the program, and then open the software for your printer on your PC.
- Print Wirelessly
Congratulations! You’ve succeeded in connecting to connect your HP Envy 6400 printer to your WiFi network! You are now able to print wirelessly from any device connected to a WiFi connection. Select one of the printers for your device and print!
Conclusion
The process of connecting to connect your HP Envy 6400 printer to your WiFi network might appear to be a daunting task however, with these easy steps, it’s easy. If you make sure that the WiFi network is secure by preparing your printer and connecting it to your WiFi network by testing your connection and installing the printer’s software, and printing wirelessly it will be running your printer within a matter of minutes. When your printer is linked to the WiFi networks, it will have the convenience and flexibility of wireless printing on any device at the office or at home.
FAQs
What happens if my printer does not have a wireless connection?
If your printer isn’t equipped with a wireless button, go to the control panel of your printer and choose “Network Setup” or “Wireless Setup.”
Can I connect my printer to the WiFi network without having a password?
There is no need for a password in order to attach your printer to the WiFi network.
What happens if my printer isn’t able to join my wireless network?
Check the WiFi network settings. You can also refer to the user manual of your printer to find troubleshooting advice.
Do I have the ability to be connected the HP Envy 6400 printer to several WiFi networks?
Yes, you are able to join your printer on several WiFi networks. However, you only need to print on just one network at the same time.
Do I need to install the printer software on all of my devices?
Yes, you can make use of the printer on other devices like the iPhone, iPad, or laptops. You must install HP driver drivers for your printer.
Also Read:-